Plane crash map Locate crash sites, wreckage and more

N6555K accident description

Arkansas map... Arkansas list
Crash location 33.693055°N, 91.379445°W
Nearest city Tiller, AR
We couldn't find this city on a map
Tail number N6555K
Accident date 16 Jul 2004
Aircraft type Grumman G-164C
Additional details: None

NTSB Factual Report

On July 16, 2004, at 1245 central daylight time, a Grumman G-164C single-engine, tail-equipped agricultural airplane, N6555K, was substantially damaged when it impacted terrain following a loss of directional control during landing roll at Flying G Ranch Airport (AR79), near Tillar, Arkansas. The commercial pilot did not sustain any injuries. The airplane was registered to and operated by Moss Flying Service of Tillar, Arkansas. Visual meteorological conditions prevailed, and a flight plan was not filed for the 14 Code of Federal Regulations Part 137 aerial application flight. The local flight was terminating at the time of the accident.

According to the Pilot/Operator Aircraft Accident Report (NTSB Form 6120.1/2), the 17,174-hour pilot reported that after landing on runway 27 (3,750 feet long and 150 feet wide concrete and turf runway), the right main landing gear braking system "gave way." Subsequently, the airplane turned to the left, impacted a ditch, and nosed into the ground.

Examination by an Federal Aviation Administration (FAA) inspector, who responded to the accident site, revealed that the left landing gear was collapsed, the firewall was bent, and both wings sustained structural damage to the spars. Further examination revealed that hydraulic fluid in the right master brake cylinder was empty.

According to the aircraft's logbooks, the airplane had accumulated approximately 233 hours since the last annual inspection on April 4, 2004. At that time, the airframe total time was 2,634 hours.

NTSB Probable Cause

The pilot's inability to maintain control of the airplane while landing due to a brake system failure.

© 2009-2020 Lee C. Baker / Crosswind Software, LLC. For informational purposes only.