Plane crash map Locate crash sites, wreckage and more

N22055 accident description

North Carolina map... North Carolina list
Crash location 36.023334°N, 78.330278°W
Nearest city Louisburg, NC
36.099039°N, 78.301106°W
5.5 miles away
Tail number N22055
Accident date 28 May 2005
Aircraft type Cessna 172R
Additional details: None

NTSB Factual Report

On May 28, 2005, about 0910 eastern daylight time, a Cessna 172R, N22055, registered to Carlina, Inc., and operated by First in Flight Aviation, collided with the runway during an attempted go-around at Franklin County Airport, Louisburg, North Carolina. The personal flight was operated under the provisions of Title 14 CFR Part 91 with no flight plan filed. Visual meteorological conditions prevailed. The private pilot reported no injuries, and the airplane sustained substantial damage. The local flight departed Franklin County Airport about 0840.

The pilot stated he was practicing takeoffs and landings on runway 22, and the accident occurred on what was to be the last landing of the flight. He stated he was attempting a simulated engine-out landing, and the airplane was lined up on short final when "something didn't feel right, so I initiated a go-around." He stated he applied full power, and the airplane "began a wingover to the left, which I countered, but it started to do the same in the other direction, which I also countered, and it again dropped the left wing, which made contact with the ground in the grass on the left side of the runway." He stated the airplane then contacted the runway in a "nose slightly down attitude."

Examination of the airplane revealed the propeller was damaged, the nosewheel was separated, the right main wheel was separated, both wings were bent, and the fuselage was buckled aft of the baggage door. No mechanical malfunction of the airplane was reported or observed.

NTSB Probable Cause

The pilot's failure to maintain adequate airspeed, which resulted in a stall and subsequent loss of control and collision with the ground.

© 2009-2020 Lee C. Baker / Crosswind Software, LLC. For informational purposes only.